+86 18851021479 
실제 모습 보기 더 알아보기
실제 모습 보기 더 알아보기
실제 모습 보기 더 알아보기
Reduce heavy-duty cable and temporary distribution requirements
Bring power closer to deep and distributed work areas
Reduce cable routing, protection and removal work
From handheld tools to higher-power field equipment
Power for different field equipment
Handles startup loads from pumps, cutters and motor-driven equipment
No combustion exhaust from a fuel engine
Reduce continuous generator noise
Less fuel transport, storage and handling
Bring power directly to the maintenance point
Move quickly from one maintenance point to the next
Reduce temporary power setup requirements
Sized for equipment loads and required operating time.
AC and generator charging options, depending on model configuration.
Protection against dust and splashing water
For changing seasonal jobsite conditions
*Temperature range depends on the final specifications of the corresponding model.
Consistent cells for stable power output
Over-Current · Over-Temperature · Short-Circuit · Battery Monitoring
Industrial portable power stations can be transported directly to the maintenance area to power tools, lighting, pumps, fans and welding equipment, reducing the need for long temporary cables and distribution systems from tunnel portals or fixed power points.
Yes. The system can be selected according to rated power and startup current. The PS Series provides 3.5–50kW configurations with up to 3× surge capability for pumps, cutters, grinders and other motor-driven loads. Equipment nameplate data is recommended for accurate sizing.
Runtime depends on equipment power, actual load, the number of devices operating simultaneously and battery capacity. Lighting, power tools and pumps have very different duty cycles. Share your equipment power, quantity and required operating time, and we can calculate the recommended battery capacity and configuration.
For maintenance points far from tunnel portals or fixed power, mobile battery power can reduce the need for long heavy-duty cables, temporary distribution, cable protection, routing and removal. Power can also move between work points, making it well suited to multi-point maintenance and emergency repair.
It is well suited to maintenance tasks requiring rapid deployment. Mobile power can be transported directly to the work area, reducing time spent installing long temporary power lines and allowing the system to move to the next work point. Configuration should be based on the maintenance window, loads and required runtime.
Share the tunnel length or distance to the work point, equipment type and quantity, rated power, 220V/380V requirements, startup power and expected operating time. We can configure the appropriate output power, battery capacity and runtime for a complete tunnel and bridge maintenance power solution.
